New Cat C-Series Wheel Skidders with ACERT Technology offers maximum productivity, reliability and lower owner and operating cost while meeting Tier3 emission standard regulations.
Engine |
Units: US | |
Engine Model |
Cat® C7 ACERT |
Cat® C7 ACERT |
Net Flywheel Power |
219 hp |
163 kW |
Net Power – ISO 9249 |
219 hp |
163 kW |
Net Power – SAE J1349 |
219 hp |
163 kW |
Gross Power – SAE J1995 |
232 hp |
173 kW |
Governed Speed at Rated Power |
1800 RPM |
1800 RPM |
Displacement |
439 in3 |
7.2 L |
Bore |
5 in |
127 mm |
Stroke |
5 in |
127 mm |
Torque Rise |
9% at 1400 RPM |
9% at 1400 RPM |
Max Torque @ Rated Speed |
951 N-m at 1400 RPM |
951 N-m at 1400 RPM |
Derating Altitude |
9842 ft |
3000 m |
Air Cleaner |
Dry precleaner |
Dry precleaner |
Alternator |
Serpentine belt driven, brushless |
Serpentine belt driven, brushless |
Electrical System |
24V Direct Electric |
24V Direct Electric |
Battery – Quantity |
2 |
2 |
Battery – Volts |
12V |
12V |
Battery – Capacity |
950 CCA |
950 CCA |
Starting System |
Direct electric |
Direct electric |
Number of Cylinders |
6 |
6 |
Engine Make |
DITAC EUI: 4 stroke cycle diesel |
DITAC EUI: 4 stroke cycle diesel |
Dimensions |
||
Wheelbase |
155.1 in |
3939 mm |
Length |
316.06 in |
8028 mm |
Overall width |
133.8 in |
3398 mm |
Height |
125.4 in |
3184.4 mm |
Ground Clearance |
21 in |
533 mm |
Boom height – max, standard |
169.4 in |
4302 mm |
Top roller height (cable) |
109 in |
2771 mm |
Axle height |
33.2 in |
843 mm |
Rear axle to pin |
86.7 in |
2203 mm |
Length – overall, grapple, dual |
316 in |
8028 mm |
Length, overall, cable |
295.8 in |
7514 mm |
Decking blade lift height |
54.4 in |
1381 mm |
Decking blade dig depth |
17.9 in |
456 mm |
Height – top of cab |
125.4 in |
3184.4 mm |
Decking blade width |
123.5 in |
3138 mm |
Tread width |
103.2 in |
2622 mm |
Turning radius over tires |
252 in |
6400 mm |
Grapple |
||
Bunching Capacity |
16.6 ft2 |
1.54 m2 |
Thinning Capacity |
19 ft2 |
1.78 m2 |
Sorting Capacity |
14.4 ft2 |
1.34 m2 |
Bunching – Full Open Height |
75 in |
1905 mm |
Bunching – Fully Closed Height |
54 in |
1371 mm |
Bunching – Min. Stem Diameter |
7.2 in |
183 mm |
Bunching – Tip to Tip Height |
83 in |
2108 mm |
Bunching – Tong Opening |
127 in |
3226 mm |
Thinning – Tip to Tip Height |
85 in |
2159 mm |
Thinning – Tong Opening |
135 in |
3429 mm |
Thinning – Full Open Height |
74 in |
1880 mm |
Thinning – Min. Stem Diameter |
9.5 in |
241 mm |
Thinning – Fully Closed Height |
58 in |
1473 mm |
Weights |
||
Est Operating Weight |
42325 lb |
19198 kg |
Service Refill |
||
Fuel Tank |
99.8 gal |
378 L |
Cooling System |
15 gal |
56.7 L |
Differential, Final Drive – Front |
13.7 gal |
52 L |
Differential, Final Drive – Rear |
19.5 gal |
74 L |
Engine Oil |
7.1 gal |
27 L |
Transmission, Torque Converter |
14.2 gal |
54 L |
Mechanical Winch |
6.5 gal |
24.5 L |
Hydraulic System – Tank |
14.3 gal |
54 L |
Hydraulic System – Total |
29.6 gal |
112 L |
Power Train |
||
Travel Speed – Fwd. 1st |
4 mph |
6.4 km/h |
Travel Speed – Fwd. 2nd |
5.6 mph |
9 km/h |
Travel Speed – Fwd. 3rd |
6.8 mph |
10.9 km/h |
Travel Speed – Fwd. 4th |
9.5 mph |
15.3 km/h |
Travel Speed – Fwd. 5th |
17.1 mph |
27.5 km/h |
Travel Speed – Rev. 1st |
3.9 mph |
6.2 km/h |
Travel Speed – Rev. 2nd |
6.5 mph |
10.5 km/h |
Travel Speed – Rev. 3rd |
11.6 mph |
18.6 km/h |
Max Drawbar Pull |
44293 lb |
197 kN |
Torque Converter – Model |
C484-E3G IIIAAA |
C484-E3G IIIAAA |
Torque Converter – Type |
Lock-up clutch |
Lock-up clutch |
Transmission |
5 fwd / 3 rev countershaft, powershift |
5 fwd / 3 rev countershaft, powershift |
Steering, frame articulation |
+/- 45° |
+/- 45° |
Brakes – Service Type |
Enclosed wet disc each wheel, full hydraulic |
Enclosed wet disc each wheel, full hydraulic |
Brakes – Parking Type |
Spring applied, hydraulic released, Electro-hydraulic controlled |
Spring applied, hydraulic released, Electro-hydraulic controlled |
Transmission Cooler Type |
Plate |
Plate |
Hydraulic System |
||
Circuit Type |
Closed center, variable flow |
Closed center, variable flow |
Pump Type |
Axial piston |
Axial piston |
Pump Output |
50 gal/min |
190 L/min |
Relief Valve Setting |
3045 psi |
21000 kPa |
Reservoir Tank Capacity |
14.27 gal |
54 L |
Steering Valve |
Direct link, non-follow |
Direct link, non-follow |
Steering Cylinder – Bore |
3.5 in |
88.9 mm |
Steering Cylinder – Stroke |
17.22 in |
437.5 mm |
Steering Cylinder – Rod Diameter |
2 in |
50.8 mm |
Dozer Valve |
Electro-hydraulic |
Electro-hydraulic |
Dozer Cylinder – Bore |
4 in |
101.6 mm |
Dozer Cylinder – Stroke |
4 in |
101.6 mm |
Dozer Cylinder – Rod Diameter |
2.25 in |
57.15 mm |
Grapple Valve |
4 or 5 stack, pilot |
4 or 5 stack, pilot |
Arch |
||
Dual Function – Lift highest, retracted |
110.91 in |
2817 mm |
Dual Function – Lift highest, farthest |
85.16 in |
2163 mm |
Dual Function – Lift max reach |
56.81 in |
1443 mm |
Dual Function – Lift lowest, retracted |
39.92 in |
1014 mm |
Dual Function – Lift lowest, farthest |
13.19 in |
335 mm |
Dual Function – Loaded tire radius |
33.19 in |
843 mm |
Dual Function – Reach Highest, Retracted |
65.08 in |
1653 mm |
Dual Function – Reach Lowest, Retracted |
69.88 in |
1775 mm |
Dual Function – Reach Lowest, Farthest |
108.74 in |
2762 mm |
Dual Function – Reach Highest, Farthest |
117.24 in |
2978 mm |
Dual Function – Reach Max |
122.87 in |
3121 mm |
Arch, Dual Function |
||
CR – Lift highest, retracted |
110.91 in |
2817 mm |
CR – Lift highest, farthest |
85.16 in |
2163 mm |
CR – Lift maximum reach |
56.81 in |
1443 mm |
CR – Lift lowest, retracted |
39.92 in |
1014 mm |
CR – Lift lowest, farthest |
13.19 in |
335 mm |
CR – Loaded tire radius |
33.19 in |
843 mm |
CR – Reach highest, retracted |
65.08 in |
1653 mm |
CR – Reach lowest, retracted |
69.88 in |
1775 mm |
CR – Reach lowest, farthest |
108.74 in |
2762 mm |
CR – Reach highest, farthest |
117.24 in |
2978 mm |
CR – Reach maximum |
122.87 in |
3121 mm |
Grapple, CR – Bunching |
||
Grapple capacity |
16.6 ft2 |
1.54 m2 |
Tip to tip height |
83 in |
2108 mm |
Tong opening |
127 in |
3226 mm |
Full open height |
75 in |
1905 mm |
Minimum stem diameter |
7.2 in |
183 mm |
Full closed height |
54 in |
1371 mm |
Grapple, CR – Thinning |
||
Grapple capacity |
19 ft2 |
1.78 m2 |
Tip to tip height |
85 in |
2159 mm |
Tong opening |
135 in |
3429 mm |
Full open height |
74 in |
1880 mm |
Minimum stem diameter |
9.5 in |
241 mm |
Full closed height |
58 in |
1473 mm |
Winch – Grapple Skidder |
||
Max Line Pull – Bare Drum |
39342 lb |
175 kN |
Max Line Speed |
132 ft/min |
40.2 m/min |
Drum Capacity 19.0mm (3/4in) |
154 ft |
47 m |
Drum Capacity 22.2mm (7/8in) |
97 ft |
30 m |
Drum capacity 25.4mm (1in) |
91 ft |
28 m |
Drum Diameter |
9 in |
229 mm |
Drum Width |
11 in |
279 mm |
Winch – Cable Skidder |
||
Max Line Pull – Bare Drum |
45850 lb |
204 kN |
Max Line Speed |
360 ft/min |
110 m/min |
Drum Capacity 19.0mm (3/4in) |
148 ft |
45 m |
Drum Capacity 22.2mm (7/8in) |
105 ft |
32 m |
Drum capacity 25.4mm (1in) |
82 ft |
25 m |
Drum Diameter |
10 in |
254 mm |
Drum Width |
11 in |
279 mm |
MSC Comments |
||
Spec Date |
5/06 | |
