How to tow trailers, equipment properly to avoid costly lawsuits

Updated Feb 11, 2019

Wd Hitch Setup Lead Towing

Chances are you’ve seen a trailer flipped, and the pickup towing it off the road or wrecked close by.

If the driver’s lucky, it was only the trailer and pickup that got damaged. Worse case scenario: someone was killed in the trailer-towing accident.

The large majority of pickup-towing-trailer accidents, whether minor or major, are directly related to the trailer being overloaded for the truck towing it – or the truck not being “properly equipped” to handle the trailered load.

Either way, if there are injuries or death involved, the company that owns the pickup can expect to be sued. The company will most likely lose, because it’s easy to show the driver was negligent.

The driver was negligent because the pickup wasn’t properly equipped per the vehicle manufacturer’s stated guidelines of using a weight-distributing hitch when towing trailers over a certain loaded weight.

You think your pickup pulls a trailer quite well in your estimation, so why bother with a weight-distributing hitch setup that might add 60 seconds to your hookup routine?

You’d be better to ask, “Why not?”

Most pickup makes/models have different tow ratings. What pickups can “legally” tow – be it stock or modified in some fashion – is usually less than the advertised tow rating; among other things, those ratings don’t usually include the weight of the hitch or hardware, cargo or passengers.

Those tow ratings are also determined by towing on-the-ball with the hitch and shank, or employing a weight-distributing hitch.

All of the vehicle manufacturer’s towing guides have an asterisk or footnote emphasizing that above a certain trailer and/or tongue weight, a weight-distributing hitch must be used.

For instance, the 2011 Ram HD pickups list a weight-distribution hitch as required for trailers weighing more than 5,000 pounds.

Ford’s 2015 SuperDuty Towing Guide has the footnote right at the header, “Maximum loaded trailer weight requires weight-distribution hitch.”

Chevrolet’s 2015 Trailering Guide for 1/2-tons requires weight-distribution for any trailer that, when loaded, will weigh more than 5,000 pounds.

Weight-distribution guidelines also apply to pre-2011 models, often with lower thresholds since earlier trucks towed less.

Liability issue

Why all the fuss? What the manufacturer requires in your owner’s manual, data plates and stickers on the truck, and trailer guides opens your company to legal liability in the event of any incident where the driver of the tow vehicle is found to be towing outside those requirements.

The truck maker may have deep pockets, but if you weren’t towing as required, it will be your corporate pockets that gets emptied.

If your insurance company considers you operating unsafely by disregarding requirements set forth in the owner’s manual and all relevant literature, don’t expect any help from them.

As Jonathan Michaels, founding member of Michaels Law Group, which specializes in representing clients in the automotive industry notes, “Towing regulations are governed by state vehicle codes, and they provide for specific methods of use and installation for towing mechanisms.

“Failure to comply with these varied requirements can lead to steep civil liability for both the vehicle operator and vehicle owner under the legal theory of negligence per se,” Michaels says.

So whether or not you think your truck needs it, legal and insurance requirements dictate you use a weight-distribution setup above the pickup manufacturer’s stated trailered weights.

Benefits of a W-D hitch

A weight-distributing hitch greatly improves the road and handling of a stock pickup when towing a trailer that weighs more than the tow vehicle.

If the ride height, springs, shocks, wheels, tires or some combination of suspension elements have been modified, the added stability that a W-D hitch provides may be doubly welcome.

Also, adding a lot of weight to the rear axle tends to lighten the front axle, making steering touchy, less likely to return to center and perhaps altering the geometry enough that tires will wear prematurely.

The concept behind a W-D hitch employs basic physics to balance the load on the truck more equally between front and rear axles.

The main goal using such a hitch is to have the truck remain at its normal level stance with minimum drop on the rear axle, while the trailer remains level on its axles. This provides the best vehicle and trailer handling.

EDITOR’S NOTE: Information provided by sister site, Hard Working Trucks

The Attachments Idea Book
Landscapers use a variety of attachments for doing everything from snow removal to jobsite cleanup, and regardless of how often they are used, every landscaper has a favorite attachment.
Download
Attachments Idea Book Cover